Download Free IBM C1000-082 Real Exam Questions Download
Latest IBM C1000-082 Real Exam Dumps PDF
NEW QUESTION # 32
A department has a business requirement that all their backups are encrypted to prevent data from being read during the transmission to the server and also once written in the storage pool. Which encrypted method satisfies all those requirements?
- A. tape drive encryption
- B. client-side encryption
- C. SSL encrypted communication
- D. server-side encryption
Answer: B
Explanation:
According to IBM's documentation12, client-side encryption is a method of encrypting data before it is sent to the server for backup or archive operations. Client-side encryption uses a password that is entered by the user to generate an encryption key. The password needs to be confirmed when encrypting the file for backup, and also needs to be entered when performing restores of encrypted files12.
Client-side encryption satisfies all the requirements of encrypting data during transmission and storage, because:
It prevents data from being read during transmission, because the data is encrypted before it leaves the client system3.
It prevents data from being read once written in the storage pool, because the data remains encrypted on the server and can only be decrypted with the password that is known by the user3.
NEW QUESTION # 33
What are clients at-risk in the Operation Center?
- A. clients that are running older clients with security vulnerabilities
- B. clients without successful backup based on the policy
- C. clients that are running low on disk space
- D. clients that are potentially infected by ransomware
Answer: B
Explanation:
According to IBM documentation1, clients at-risk in the Operation Center are clients without successful backup based on the policy. The Operation Center shows a large number of "At Risk" clients even though backups are completing normally if the number of "At Risk" clients is larger than the number of failed client backups.
https://www.ibm.com/support/pages/operation-center-showing-high-number-risk-clients
NEW QUESTION # 34
Windows system objects can be spread out across multiple volumes, and should be backed up by using which command?
- A. BACKUP IMAGE C: \
- B. PROTECT SYSTEMSTATE
- C. BACKUP SYSTEMSTATE
- D. BACKUP REGISTRY
Answer: C
Explanation:
According to IBM documentation1, Windows system state objects can be backed up by using the BACKUP SYSTEMSTATE command. This command creates a backup of system state data that includes registry files, COM+ class registration database, system files under Windows File Protection, Active Directory directory service (for domain controllers only), Sysvol directory share (for domain controllers only), Certificate Services database (for certification authority only), Cluster database (for cluster nodes only), and NTDS.DIT file (the Active Directory database).
NEW QUESTION # 35
Which data is captured in a retention set?
- A. copies of all archived objects for a particular node or virtual machine
- B. a subset of selected active and inactive data for a particular node or virtual machine
- C. a point-in-time snapshot of all the data in one or more file spaces that was active at the time of the snapshot
- D. a point-in-time collection of inactive client backup data for a set of nodes or virtual machines
Answer: D
Explanation:
According to the web search results, a retention set is a point-in-time collection of inactive client backup data for a set of nodes or virtual machines1. A retention set can be used to meet long-term data retention requirements without having to store multiple copies of the data on the server1.
NEW QUESTION # 36
Which command defines or deletes all drives and their paths for a single library in one step?
- A. DEFINE DRIVE with AUTODETECT=ON
- B. PERFORM LIBACTION with SANDISCOVERY=ON
- C. DEFINE LIBRARY with SANDISCOVERY=ON
- D. AUDIT LIBRARY with AUTODISCOVERY=ON
Answer: B
Explanation:
According to the IBM Spectrum Protect documentation1, one command that defines or deletes all drives and their paths for a single library in one step is PERFORM LIBACTION with SANDISCOVERY=ON. This command performs a SAN discovery operation on a SCSI or VTL library and automatically defines or deletes all drives and paths that are associated with the library.
https://www.ibm.com/docs/en/spectrum-protect/8.1.7?topic=commands-define-drive-define-drive-library
NEW QUESTION # 37
Which privilege class can perform all administrative functions?
- A. root
- B. superuser
- C. administrator
- D. system
Answer: D
Explanation:
According to IBM Spectrum Protect V8.1.9 documentation1, a system administrator has the highest level of authority in IBM Spectrum Protect. A system administrator can issue any administrative command and has authority to grant or revoke privileges for other administrators.
The privilege class for a system administrator is SYstem1. The other privilege classes such as root, administrator, or superuser are not valid for IBM Spectrum Protect.
In IBM Spectrum Protect (formerly known as Tivoli Storage Manager), the system privilege class can perform all administrative functions. The system privilege class includes the following permissions:
SYSOP: System operations
AUDIT: Auditing operations
SECURITY: Security operations
NODEADDP: Add nodes
NODEDELP: Delete nodes
MGMTCLAS: Management class operations
DEVCLASS: Device class operations
STGPOOL: Storage pool operations
LIBRARY: Library operations
QUERY: Query operations
BACKUP: Backup and archive operations
RESTORE: Restore operations
ARCHIVE: Archive operations
RESTOREVM: Restore virtual machine operations
PROXY: Proxy operations
NEW QUESTION # 38
Which process needs to be run before automatic failover can occur?
- A. tier to tape
- B. node replication
- C. data deduplication
- D. migration
Answer: B
Explanation:
In IBM Spectrum Protect, automatic failover can occur when a primary node fails and a secondary node takes over its responsibilities. In order for this to work, the secondary node must be an exact copy of the primary node. This is achieved through node replication, which synchronizes the data and configuration between the primary and secondary nodes.
Node replication is a process that needs to be set up and run before automatic failover can occur. It involves creating a copy of the primary node and configuring it as a secondary node. The data and configuration are then synchronized between the two nodes, either continuously or on a schedule.
Once node replication is set up, the secondary node can take over the primary node's responsibilities in the event of a failure, without any interruption in service.
To summarize, node replication is the process that needs to be run before automatic failover can occur in IBM Spectrum Protect.
NEW QUESTION # 39
Which type of client backup can be restored without having access to the server?
- A. backupset
- B. full backup
- C. retentionset
- D. journal-based backup
Answer: A
Explanation:
According to IBM documentation1, a backup set is a collection of your files that reside on the server, onto portable media created on a device using a format that is compatible with the client device. You can restore data from a backup set without having access to the server by using the dsmc restore backupset command1.
https://www.ibm.com/docs/en/spectrum-protect/8.1.12?topic=clients-restoring-your-data
NEW QUESTION # 40
Which command is used to change the number of versions of backups to keep?
- A. UPDATE COPYGROUP
- B. UPDATE NUMVERSION
- C. UPDATE MGMTCLASS
- D. UPDATE RETRULE
Answer: A
Explanation:
you can change the number of versions of backups to keep with settings in the Operations Center: Backups1. If you use commands, you can use the DEFINE COPYGROUP command with the VEREXISTS parameter1.
NEW QUESTION # 41
When is the SESSIONSECURITY parameter of TRANSITIONAL used?
- A. when passwords less than 8 characters are used on a client
- B. when a client must double-hop (transit) through a stateless firewall that does not support SSL communication
- C. when running a supported client below version V8.1.2
- D. when using LDAP or AD security for a client authentication
Answer: C
Explanation:
According to IBM documentation1, the SESSIONSECURITY parameter of TRANSITIONAL is used when you want to use the existing communication protocol while you update your IBM Spectrum Protect software to V8.1.2 or later. This is the default value.
https://www.ibm.com/docs/en/spectrum-protect/8.1.12?topic=ss-security-concepts
NEW QUESTION # 42
Which kind of scheduling is affected by the RANDOMIZATION parameter?
- A. server-polling
- B. client-polling
- C. client-prompted
- D. server-prompted
Answer: B
Explanation:
The RANDOMIZATION parameter sets randomized start times within the startup window of each schedule for clients by using the client-polling scheduling mode1. A startup window is the start time and duration during which a schedule must be initiated. The RANDOMIZATION parameter does not affect other scheduling modes such as server-polling, client-prompted, or server-prompted.
https://www.ibm.com/docs/en/spectrum-protect/8.1.2?topic=commands-set-randomize-set-randomization-scheduled-start-times
NEW QUESTION # 43
How is the mail server information configured for the Operations Center to be able to send reports?
- A. start the Operations Center configuration wizard
- B. click Configure Mail Server in the Reports section
- C. add the SMTPSERVER option in dsmserv.opt
- D. use the SET REPORTSMTPHOST command and restart the Operations Center services
Answer: B
Explanation:
https://www.ibm.com/docs/en/spectrum-protect/8.1.7?topic=solutions-tracking-system-status-by-using-email-reports
NEW QUESTION # 44
Which feature allows quiescing of database applications in Hyper-V and VMware virtual environments?
- A. Database Autoquiesce
- B. Database Manager Recovery
- C. Database Log Recovery
- D. Application Aware backups
Answer: D
Explanation:
According to IBM documentation1, Application Aware backups allow quiescing of database applications in Hyper-V and VMware virtual environments. Application Aware backups use Microsoft Volume Shadow Copy Service (VSS) or VMware Tools to create a consistent snapshot of the application data.
IBM Spectrum Protect - IBM Documentation
NEW QUESTION # 45
What is the purpose of the VALIDATE REPLPOLICY command?
- A. compare the policies on the source and target replication servers
- B. verify the status of replication storage rules
- C. validate which nodes are configured for replication
- D. ensure the policies are replicated from the source to the target replication server
Answer: A
Explanation:
According to the web search results, the best answer is C. compare the policies on the source and target replication servers. This command is used to verify that the policies on the target replication server match those on the source replication server1.
NEW QUESTION # 46
What do dissimilar policies provide in IBM Spectrum Protect node replication between source and target servers?
- A. differing retention of data
- B. differing prioritization of client replication operations
- C. differing client node names
- D. differing administrative client owners
Answer: A
Explanation:
In IBM Spectrum Protect node replication, dissimilar policies provide the ability to replicate client data between source and target servers with differing retention settings.
Dissimilar policies allow for more granular control over the retention settings of client data on the target server, which can be different from the retention settings on the source server. This means that the data can be kept for a longer or shorter period of time on the target server compared to the source server, based on the specific retention policies configured for the target server.
According to IBM documentation1, dissimilar policies provide the ability to use different management policies on the target replication server than on the source replication server. This means that you can have different retention periods, storage pools, or data types for replicated data on the target server. You can enable this feature by using the SET DISSIMILARPOLICIES command.
https://www.ibm.com/docs/SSEQVQ_8.1.9/srv.reference/r_cmd_dissimilarpolicies_set.html
NEW QUESTION # 47
Which value can be determined in a storage rule after defining the source container and target cloud?
- A. when the tiering schedule expires
- B. the period of the tiering schedule
- C. how long to keep the data before moving to cloud
- D. the status of the data to be retrieved from cloud
Answer: B
Explanation:
According to IBM documentation12, a tiering rule defines when data is tiered from one or more directory-container storage pools to a cloud-container or tape storage pool. The source and target storage pools must exist before you create the tiering rule.
https://www.ibm.com/docs/en/spectrum-protect/8.1.8?topic=rule-define-stgrule-define-storage-tiering
NEW QUESTION # 48
How are software packages downloaded for automatic client deployment if multiple client platforms are present?
- A. The Operations Center downloads required packages used in the environment.
- B. Each package must be individually selected in the Operations Center.
- C. Downloads are managed according to client platforms defined by the customer.
- D. The administrator has to download the packages manually.
Answer: D
Explanation:
According to IBM Spectrum Protect V8.1.9 documentation1, automatic client deployment is a feature that allows the IBM Spectrum Protect server to automatically upgrade backup-archive clients on client workstations. The existing backup-archive clients must be at version 6.4.3 or later.
To use this feature, you must download the software packages for the client platforms that you want to upgrade from the IBM Support website23. You can use the Operations Center or command line interface to specify where to store these packages on the server and how to distribute them to clients1.
NEW QUESTION # 49
Which option is used to restore the most recent backup version of a file, even if the backup is inactive?
- A. CURRENT
- B. IFN EWER
- C. INACTIVE
- D. LATEST
Answer: D
Explanation:
According to the IBM Spectrum Protect V8.1.9 documentation, the option to restore the most recent backup version of a file, even if the backup is inactive, is the LATEST option. This option will restore the last backup version of a file regardless of the backup's status.
Here is an example command using the LATEST option to restore a file:
restore /home/user1/testfile -latest
This command will restore the most recent backup version of the file "testfile" regardless of whether the backup is active or inactive.
https://www.ibm.com/docs/en/spectrum-protect/8.1.12?topic=clients-restoring-your-data
NEW QUESTION # 50
What is the purpose of the client option TXNBYTELIMIT?
- A. It sets the maximum number of objects in a client session transaction.
- B. It sets the maximum size of an upload transaction between IBM Spectrum Protect and IBM Spectrum Protect Plus.
- C. It sets the maximum size included in a single client session transaction.
- D. It sets the maximum number of client session transactions during the backup window.
Answer: C
Explanation:
According to IBM documentation1, the client option TXNBYTELIMIT specifies the number of kilobytes that the client program buffers before sending data to the server. This option affects how often data is sent to the server during backup and archive operations.
https://www.ibm.com/docs/SSEQVQ_8.1.8/client/c_opt_clioptref.html
NEW QUESTION # 51
Who can issue the REPAIR STGPOOL command?
- A. only an admin with Policy privilege class or higher
- B. only an admin with System privilege class
- C. any admin with Storage privilege class or higher who has been designated as an approval administrator
- D. any admin who has been designated as an approval administrator
Answer: D
Explanation:
According to IBM documentation1, the REPAIR STGPOOL command is a restricted command that requires authorization from an approval administrator. An approval administrator is an administrative user who has been designated as an approver for restricted commands by using the SET APPROVALADMIN command2.
NEW QUESTION # 52
In the Activity section of the Operations Center, which type of client should be reviewed to see only the activity related to IBM Spectrum Protect Plus?
- A. Object
- B. Virtual
- C. System
- D. Applications
Answer: B
Explanation:
According to the IBM Spectrum Protect Plus documentation1, it is a data protection solution that provides near-instant recovery, replication, retention management, and reuse for virtual machines, databases, and applications backups in hybrid multicloud environments.
https://www.redbooks.ibm.com/abstracts/redp5532.html
NEW QUESTION # 53
What happens by default if the journal engine service is installed and running when the incremental command is used for a backup?
- A. It backs up the file journal on an incremental basis.
- B. It monitors the incremental backup process and collects all data that is eligible for the next journal-based full backup.
- C. It updates the journal database with current data after a successful backup.
- D. It performs a journal-based backup on file systems that are being monitored by the journal engine service.
Answer: D
Explanation:
The journal engine service monitors changes to specified files and directories and records information about the changes in a journal database. When a backup is performed on a file system that is being monitored by the journal engine service, IBM Spectrum Protect uses the information in the journal database to perform a journal-based backup. This allows IBM Spectrum Protect to quickly identify and back up only the files that have changed since the last backup, reducing the amount of data that needs to be backed up and speeding up the backup process.
According to IBM Spectrum Protect V8.1.9 documentation1, journal-based backup is an alternate method of backup that uses a change journal maintained by the IBM Spectrum Protect journal service process. To support journal-based backup, you must configure the journal engine service using the dsmcutil command or the client GUI setup wizard.
The incremental command backs up all new or changed data in the locations that you specify, unless you exclude them from backup services2. If the journal engine service is installed and running when the incremental command is used for a backup, it performs a journal-based backup on file systems that are being monitored by the journal engine service1.
NEW QUESTION # 54
What must be considered when setting the number of parallel, database back up streams with the SET DBRECOVERY command?
- A. multiple streams can only be used for database snapshots
- B. the same number of streams are required for the restore operation
- C. each stream requires its own volume
- D. each stream requires its own password
Answer: C
Explanation:
According to IBM documentation1, one of the considerations when setting the number of parallel, database backup streams with the SET DBRECOVERY command is that each stream requires its own volume. The device class that is specified for automatic backups must have enough volumes to accommodate the number of streams that are specified. If there are not enough volumes available, some streams might fail.
NEW QUESTION # 55
......
IBM Spectrum Protect V8.1.9 software is a data backup and recovery solution that helps organizations protect their critical data against all types of threats, including cyberattacks, natural disasters, and human errors. This software provides a robust, scalable, and secure platform for data protection, with features such as automated backup and recovery, cloud support, and advanced reporting and analytics.
The IBM Spectrum Protect V8.1.9 Administration certification exam is ideal for IT professionals who are responsible for managing data backup, recovery, and storage management in their organizations. It is also suitable for those who are looking to advance their careers in the field of data protection and storage management. The IBM Spectrum Protect V8.1.9 Administration certification is recognized globally and is highly valued by employers. It is an excellent way to demonstrate your skills and knowledge in managing data protection solutions.
PDF (New 2024) Actual IBM C1000-082 Exam Questions: https://prep4sure.vcedumps.com/C1000-082-examcollection.html
