Pass Your 1Z0-1032-21 Dumps as PDF Updated on 2022 With 73 Questions
Oracle 1Z0-1032-21 Real Exam Questions and Answers FREE
NEW QUESTION 33
One of the top ISPs is blocking promotional emails coming from your domain. This has not happened before.
You check the deliverability metrics on Responsys reports for the emailcampaigns sent in the last two weeks.
What are two reasons why this is happening? (Choose two.)
- A. The ISP is recording a high number of spam trap hits and complaint rates from recipients.
- B. Recipients are forwarding your emails to everyone in their address books.
- C. Your open rates have dropped somewhatsince last month.
- D. Substantial (5%) increase in click-through rates on last week's promotional campaign.
- E. Hard bounce rates are 10% or higher.
Answer: A,E
NEW QUESTION 34
For the email campaign you are designing in EMD, the first line of the HTML creative must include thefirst name of the subscriber. The first name attribute is FNAME and is located in the profile list that is called CONTACTS.
Which option displays the correct RPL syntax?
- A. $ {CONTACTS.FNAME}
- B. #FNAME. CONTACTS
- C. $CONTACTS.FNAME
- D. FNAME ($CONTACTS)
Answer: C
Explanation:
Explanation
Reference https://community.oracle.com/docs/DOC-982465
NEW QUESTION 35
You have a requirement to create a program that allows for the same RIID_ to have multiple enactments in it, each with a unique enactment value.
What should you use to accomplish this?
- A. Custom SQL Variable
- B. EntryTracking Variable
- C. This is not possible, because RIID_ is the only variable that can be used as an identifier for a program.
- D. Custom Event
- E. This is not possible, because only one RIID_ can be in a program at a time.
Answer: B
NEW QUESTION 36
You need to create four versions of the same campaign with different subject lines to see which one receives the most opens and clicks. You are using EMD to create thecampaign.
How should you do this with Responsys?
- A. Create one campaign and configure the multivariate testing functionality available via the Version Test button in EMD of the campaign. Create a program that launches this campaign.
- B. Create four campaigns and configure the multivariate testing functionality available via the Version Test button in EMD for each campaign.
- C. Create four campaigns. Then in the program, configure a winner selection element and a Send Email Campaign element for each campaign. Publish the campaign and then determine the winner ina few days.
- D. Create one campaign. Then in the program, configure a winner selection element and a Send Email Campaign element for the campaign. Publish the campaign and then determine the winner in a few days.
Answer: C
NEW QUESTION 37
Whathappens when you send a Responsys campaign and the ISP returns a "Hard Bounce" error to the sender?
- A. A hard bounce of an email message will cause the record to be flagged as Hard Bounced in an Insight Report, and you can run a list cleanse process to remove it from your list.
- B. A hard bounce of an email message will cause the record to be logged in to the Hard Bounced table, and you must select that list as a suppression list in future message launches to ensure that you do not send to that address again.
- C. A hard bounce of an email message will set the EMAIL_DELIVERABILITY_ STATUS_ field to Undeliverable and messages will no longer be sent to that address.
- D. A hard bounce of an email message will delete the contact record from the Profile List to ensure that messages will no longer be sent to that address.
Answer: D
NEW QUESTION 38
Whichthree precautions should you take before deciding to delete a column from a Responsys data source?
(Choose three.)
- A. Ensure that there are no Connect jobs updating the column to be deleted.
- B. Check to see whether the data column is being used by the customer for external analytics purposes.
- C. Check to make sure there are no forms referencing the column.
- D. Ensure that there are no active campaigns referencing the column to bedeleted.
Answer: A,B,D
NEW QUESTION 39
You are creating a filter with many conditions in Filter Designer.
What functionality in Responsys should you use to guarantee that your rules execute as you want?
- A. Use the Enclosures feature: drag-and-drop rules in the enclosure in Filter Designer.
- B. You can only order the rules in the top-down order in which Responsys willexecute them.
- C. Use the RPL syntax<priority> and </priority> tags and include the rules to execute first inside these tags.
- D. Use the Parenthesis feature: drag-and-drop rules in the correct order between parenthesis in Filter Designer.
Answer: B
NEW QUESTION 40
You are configuring a supplemental data import and thefirst row of the file contains the names of the columns in which you are importing.
What must you do to configure this file property?
- A. Replace the first row of the file with one text string that contains all the column names separated by columns. Then proceed with the import.
- B. You must delete the first row of the file before performing the import. Your file must contain actual data only.
- C. In the field mapper screen, select the "Columns Already Included" check box.
- D. In the import configuration, select the "First line contains column names" check box.
Answer: B
NEW QUESTION 41
You havereceived requirements to create Connect Event Data Feed exports for two different integration projects. The client wishes to create two CED feeds, both including the Sent feed.
What should you do?
- A. Create the two separate exports and ensure they both have the Sent value in them.
- B. Go back to the team that developed the requirements and see if you can schedule the exports on different days. Responsys will allow the use of the same Sent value to be used in two different active exports if they are scheduled for different days of the week.
- C. Create the two separate exports and use the Sent value for one export and the SentX value for the second export.
- D. Go back to the team that developed the requirements and tell them that the Sent feed can only be used in oneactively scheduled Connect export job at one time. Determine if the same Sent feed can be sent to different file locations.
Answer: C
NEW QUESTION 42
You are designing a messaging campaign that needs personalization data for your contacts from a supplemental data source.
How should you join or reference data from the table?
- A. Youmust make sure that a Data Extraction Key field matches an existing field (in name and type) in a table being used for the campaign.
- B. After you have defined the relationship between a profile list and a supplemental table, the only way you can change or undo it is to delete the supplemental table and redefine it.
- C. You must have a one-to-one relationship between a profile list record and a record in the supplemental table.
- D. The number of records in the supplemental table cannot exceed the total number of records in the profile list.
Answer: C
Explanation:
Explanation
Reference
http://www.relationshipone.com/blog/ready-rock-responsys/
NEW QUESTION 43
After implementing and launching a campaign, you want to watch real-time opens and clicks in order to give a quick report to the executive management.
Where should you retrieve these results and what step should you take to provide the management with the reporting information?
- A. In the Program Designer, using the Analyze Reportfeature. Select the Edit active links for this launch link and copy the URL and provide it to the management.
- B. In the Campaign Workbook, use the Analyze Deliverability functionality. Select the Edit active links for this launch link and copy the URL and provide it to the management.
- C. View a Live Report for the campaign. Click the Generate Distributable Live Report URL. Provide the URL to the management to facilitate access to the Live Report.
- D. In the Campaign Workbook, in the Campaign Setting section, select the Edit active links for this launch link and copy the URL and then provide itto the management.
Answer: B
NEW QUESTION 44
Your new Responsys customer wants to begin sending email campaigns.
Which three practices should they employee for their IP address warm-up process? (Choosethree.)
- A. Establish an initial reputation with each major ISP by demonstrating that you are sending to valid email addresses with very few complaints or hard bounces.
- B. Establish volume levels going through your major ISPs as quickly as possible so you can begin reaching your subscribers without suffering declines in response rates.
- C. Send carefully planned content to highly engaged recipients.
- D. Test out a new re-engagement email campaign by sending emails to lapsed or nonengaged subscribers.
- E. Minimize complaints and bounces to establish a good reputation with each ISP.
Answer: A,C,E
NEW QUESTION 45
When identifying your target audience for IP warm up, which type of email addresses should you avoid and why?
- A. Avoid sending to addresses that have not registered an open or a click in the last six months because they may be likely to hit the spam button or be spam traps.
- B. Avoid sending to subscribers who are also receiving transactional emails because they may unsubscribe because they are likely to feel over-messaged from your brand or company.
- C. Avoid sending to subscribers who have opened or clicked in the last few days because they may not respond to an email message again so soon.
- D. Avoid sending to subscribers who have recently opted-in because they do not have a proven history of engagement.
Answer: A
NEW QUESTION 46
When you add a Conversion Tracking Tag to a Conversion Acknowledgement page, each time a visitor completes a transaction, conversion credit will be attributed to the sourcing campaign by default.
Which name-value pair should you append to the Conversion Tracking Tag to clear the cookie in order to eliminate potential duplicate reporting?
- A. action=last
- B. tracking=first
- C. tracking-once
- D. action=once
- E. action=single
Answer: C
NEW QUESTION 47
You want touse Responsys SMS that invites recipients to click a link to a web form to register for a special event. You wish to measure clicks and form submissions (conversions).
Which four steps should you perform to make this possible? (Choose four.)
- A. You mustpurchase Premium tracking in order to support link tracking in Responsys.
- B. You must select a Responsys link table with the link names and URLs to be used in the SMS message.
- C. You mustsupply a short URL, so you can use bit.ly to shorten links that you wish to use in your text message.
- D. In the SMS campaign message designer, enable conversion tracking.
- E. In the SMS campaign message designer, you must enable link tracking for the campaign.
Answer: B,C,D,E
NEW QUESTION 48
In RPL, how do you reference a value in a data source?
- A. data_source_alias.filed_name_alias
- B. data_source.field_name
- C. project_name.field_name
- D. fieldname
Answer: D
NEW QUESTION 49
You're creating an Opt-In form for your client. After a new customer submits the subscription form, you want to wait for 24 hours and then send them afollow-up email with a discount offer.
How should you create a form rule to accomplish this?
- A. Create a form rule to trigger a follow-up email message to the form submitter. In the form rule, specify a
24-hour delay before sending the email. - B. Create a form rule to populate a table with the submitted data, then schedule a campaign 24 hours later to send all newly entered subscribers the follow-up email.
- C. Create a form rule to trigger a custom event. Set up a program to listen for this customer event, wait for
24 hours, then send the follow-up email offer. - D. Create a form rule that schedules a transactional email campaign with the offer 24 hours after each form submission.
- E. Create a form rule that directs the new customer to a URL so they can enter their email address and request the discount coupon.
Answer: A
NEW QUESTION 50
You uploaded into the Responsys Content Library an HTML document and three subdocuments personalized with the member level of the subscriber. When you validate the campaign, you get this error: "Email Message preview failed because of template execution runtime error, detailed error: property MEMBER_LEVEL for datasource CONTACTS is not defined in the datasources." How should you correct this error?
- A. Open each HTML document in the package and declare the MEMBER_LEVEL field by using the RPL directive<#field> in every document. Then reupload the documents into the Content Library.
- B. The MEMBER_LEVEL field is a Responsys reserved word and cannot be used for personalization.
- C. The HTML coder didn't include the <#data> directiveand declare the CONTACTS data source in each document. Enter this into each document, and the error should now be resolved.
- D. You did not select the MEMBER_LEVEL column from the CONTACTS database. In the Datasources Section in the Campaign workbook, select the MEMBER_LEVEL field and make sure the aliasmatches what is in the HTML code. Responsys will now be able to insert values for that column at run time.
Answer: D
NEW QUESTION 51
......
Pass Oracle 1Z0-1032-21 Exam Info and Free Practice Test: https://prep4sure.vcedumps.com/1Z0-1032-21-examcollection.html
