Workday Workday-Procure-to-Pay Test Engine Dumps Training With 58 Questions
Workday-Procure-to-Pay Questions Pass on Your First Attempt Dumps for Workday Pro Financial Management Certified
NEW QUESTION # 14
What business process allows supplier control and approval prior to processing transactions?
- A. Supplier Event
- B. Supplier Request
- C. Supplier Change Event
- D. Supplier Status Change
Answer: B
Explanation:
The Supplier Request business process provides a controlled, approval-based workflow for onboarding new suppliers or modifying key supplier information before that supplier becomes eligible for transactional activity such as receiving purchase orders or invoices. The Official Workday Pro Procure-to-Pay Guide identifies Supplier Request as the business process that allows for review and approval prior to a supplier being enabled for procurement transactions, giving stakeholders such as procurement or finance teams control over which suppliers are activated. Option A is incorrect because Supplier Status Change is used to change the status, such as active to inactive, of a supplier that already exists in the system, rather than to control initial setup before transacting. Option B is incorrect because Supplier Change Event manages updates to existing supplier records after the supplier has already been established. Option C is incorrect because Supplier Event is not the specific delivered business process name associated with pre-transaction supplier review and approval; Supplier Request is the precise, correct process for this purpose.
NEW QUESTION # 15
What task must you initiate to create a primary worktag for a cost center on all purchase orders and supplier invoices?
- A. Maintain Custom Validations
- B. Maintain Worktag Usage
- C. Enable Custom Worktags
- D. Maintain Related Worktag Usage
Answer: D
Explanation:
Configuring how a worktag, such as Cost Center, is required and designated across transaction types is managed through the worktag usage configuration tasks, which control the relationships and designations of worktags on transactional documents. The Official Workday Pro Procure-to-Pay Guide associates the Maintain Related Worktag Usage task with establishing how a worktag type, such as Cost Center, functions as a primary worktag across multiple business object types, including both purchase orders and supplier invoices, ensuring consistent designation across these related transaction types. Option B is incorrect because Enable Custom Worktags is used to activate custom worktag types for use in the tenant, not to designate primary status for an existing delivered worktag type like Cost Center. Option C is incorrect because Maintain Custom Validations builds conditional messaging rules rather than configuring worktag designations. Option D, Maintain Worktag Usage, is incorrect in this context because the cross-document, related designation of cost center as primary across both purchase orders and supplier invoices is governed by the related worktag usage configuration described in the guide.
NEW QUESTION # 16
What task can you use to generate an operational journal?
- A. Create Recurring Journal Template
- B. Create Supplier Invoice
- C. Create Journal
- D. Print Checks
Answer: B
Explanation:
Workday distinguishes between manual journals, which accountants create directly using the Create Journal task, and operational journals, which are generated automatically by the system as a byproduct of posting business transactions such as supplier invoices, expense reports, and payments. The Official Workday Pro Procure-to-Pay Guide identifies the Create Supplier Invoice task as an example of a transaction that, once completed and posted, automatically generates the corresponding operational journal entries based on Account Posting Rules, without requiring any manual journal entry. Option B is incorrect because Print Checks executes the payment process for previously approved supplier invoices and is a downstream payment activity rather than the originating transaction that generates the invoice-related operational journal. Option C is incorrect because Create Journal produces a manual journal entered directly by an accountant, which is the opposite of an operational journal. Option D is incorrect because Create Recurring Journal Template defines a template used to generate manual journals on a schedule, and does not itself produce an operational journal tied to a business transaction.
NEW QUESTION # 17
A financial analyst needs to upload a large number of journal entries into Workday. They created an EIB to import this information, but a necessary column is missing from the template.
What action do they take to ensure the journals post correctly?
- A. Launch the integration.
- B. Create an EIB.
- C. Edit the template in Workday.
- D. Edit the template in Excel.
Answer: D
Explanation:
Enterprise Interface Builder, or EIB, integrations commonly use a spreadsheet template, generated by Workday, that defines the columns and structure expected when bulk-loading data such as journal entries. If the analyst discovers that a needed column, representing a required field for the journals, is missing from this template, the underlying spreadsheet itself must be updated before the data can be loaded successfully. The Official Workday Pro Procure-to-Pay Guide indicates that the appropriate action is to edit the template in Excel, adding the missing column with the correct header so the data aligns with the EIB's expected input format and field mapping. Option B is incorrect because an EIB has already been created; the issue is with the existing template's structure, not the absence of an EIB. Option C is incorrect because launching the integration with an incomplete template would simply load the data without the missing field, failing to resolve the underlying issue. Option D is incorrect because the spreadsheet template used for EIB data entry is maintained and edited in Excel, not directly within Workday.
NEW QUESTION # 18
The spend category for office equipment was created. This will post to the general ledger account 6210 Office Equipment.
How can you ensure this posts correctly for supplier invoices?
- A. Edit the Spend Account posting rule to include the Spend Category dimension and the Office Equipment valued
- B. Edit the Payables Account posting rule to include the Spend Category dimension.
- C. Edit the Payables Account posting rule to include the Spend Category dimension and the Office Equipment value.
- D. Edit the Spend Account posting rule to include the Spend Category dimension.
Answer: A
Explanation:
Account Posting Rules direct how transactions post to the general ledger based on combinations of worktag dimensions, and different rule types govern different sides of the accounting entry, such as the expense, or spend, side versus the liability side. The Official Workday Pro Procure-to-Pay Guide explains that to ensure a supplier invoice using the Office Equipment spend category posts to general ledger account 6210, the administrator should edit the Spend Account posting rule, adding both the Spend Category dimension and the specific Office Equipment value, so that the rule precisely targets transactions in that spend category and directs them to 6210. Option B is incorrect because the Payables Account posting rule governs the accounts payable liability account, not the expense account being targeted here. Option C is incorrect because including the dimension without specifying the Office Equipment value would not create a rule specific enough to differentiate this spend category from others. Option D is incorrect because it combines the correct value with the wrong rule type, the Payables Account rule, rather than the Spend Account rule.
NEW QUESTION # 19
Which option can you select when using the Create Purchase Order task?
- A. Create from purchase order template
- B. Create supplier invoice purchase order
- C. Create from a request for quote
- D. Create blank purchase order
Answer: A
Explanation:
The Create Purchase Order task provides several starting points for generating a new purchase order, allowing buyers to choose an approach that best fits the procurement scenario, whether starting fresh or leveraging previously defined structures. The Official Workday Pro Procure-to-Pay Guide identifies Create from purchase order template as one of the available options when initiating Create Purchase Order, enabling buyers to reuse a predefined template containing standard lines, suppliers, or settings for recurring purchase scenarios, improving consistency and efficiency. Option A is incorrect because creating a purchase order from a blank starting point is not how the task is structured; purchase orders are generated from templates, requisitions, or contracts rather than an unstructured blank document. Option C is incorrect because creating from a request for quote is part of the sourcing and RFQ process, which may ultimately lead to a purchase order, but is not itself a direct option presented within the Create Purchase Order task. Option D is incorrect because supplier invoices are separate downstream documents and there is no option to create a purchase order from a supplier invoice.
NEW QUESTION # 20
Which statement accurately describes requisition sourcing?
- A. All items on a requisition must be sourced at the same time.
- B. When manually sourcing a requisition, you cannot change the supplier.
- C. The requisition sourcing console can be used to manage requisitions.
- D. All lines of a requisition must be sourced from the same supplier.
Answer: C
Explanation:
Requisition sourcing is the process by which buyers review approved requisition lines and determine how they will be fulfilled, including assigning suppliers and pricing, and Workday provides tools to help buyers manage this workload efficiently across many requisitions and lines. The Official Workday Pro Procure-to- Pay Guide confirms that the requisition sourcing console can be used to manage requisitions, giving buyers a centralized view to filter, review, and act on requisition lines awaiting sourcing. Option A is incorrect because there is no requirement that all lines of a requisition be sourced from the same supplier; different lines can be sourced to different suppliers based on what each line requires. Option C is incorrect because items on a requisition do not have to be sourced all at the same time; sourcing can occur at different times for different lines. Option D is incorrect because, during manual sourcing, the buyer can in fact change or assign the supplier for a requisition line, which is a core part of the sourcing action rather than a restriction.
NEW QUESTION # 21
An administrator wants to ensure that supplier invoices and invoice adjustments with attachments will display side by side when applicable.
Where will they configure this?
- A. Edit Tenant Setup - Financials
- B. Edit Supplier Account Options
- C. Edit Company Procurement Options
- D. Edit Company Accounting Details
Answer: A
NEW QUESTION # 22
You are setting up your suppliers, and you must group them in various ways.
What is the criterion for supplier categories and groups?
- A. Unlimited supplier categories and groups
- B. No limits on supplier categories and groups
- C. One supplier category and one supplier group
- D. One supplier category and unlimited supplier groups
Answer: D
Explanation:
Workday distinguishes between supplier categories, used as a single-value classification on each supplier record for reporting purposes, and supplier groups, which provide a more flexible, multi-value grouping mechanism that can be used for security, routing, and reporting across many overlapping use cases. The Official Workday Pro Procure-to-Pay Guide confirms that each supplier may be assigned to exactly one supplier category, while being added to an unlimited number of supplier groups, allowing suppliers to participate in many different group-based configurations simultaneously while maintaining a single primary classification. Option A is incorrect because limiting supplier groups to one would eliminate the flexibility that groups are specifically designed to provide. Option C is incorrect because allowing no limits on supplier categories would contradict the single-category design intended for consistent primary classification. Option D is incorrect because, although supplier groups are indeed unlimited, the option also incorrectly claims unlimited supplier categories, which is not supported by the supplier record's single-category field.
NEW QUESTION # 23
A worker creates a requisition for a new laptop. The buyer receives the requisition.
What action can the buyer perform in Workday from the requisition?
- A. Specify a supplier
- B. Issue the requisition
- C. Forward the requisition to the supplier
- D. Create a purchase item
Answer: A
Explanation:
After a worker submits a requisition, it is routed through the requisition business process to a buyer for sourcing, the step in which the buyer determines how the requisition will be fulfilled. The Official Workday Pro Procure-to-Pay Guide describes sourcing as the point where the buyer reviews requisition lines and assigns or confirms the supplier that will fulfill the order, among other sourcing actions such as setting pricing. Specifying a supplier is therefore a core action the buyer performs directly on the requisition during this step. Option A is incorrect because requisitions are internal documents and are not forwarded directly to suppliers; communication with suppliers occurs through purchase orders. Option B is incorrect because creating a purchase item is a separate procurement catalog setup activity, unrelated to processing an individual requisition. Option C is incorrect because Issue is an action performed on a purchase order after it has been created from the sourced requisition, not an action available directly on the requisition itself.
NEW QUESTION # 24
Which field is available when completing the Edit Company Procurement Options task?
- A. Mass Update Ledger Period Status
- B. Enable Multi-Company on Purchase Orders
- C. Enable Company Accounting Details
- D. Default Ship-To Contact and Shipping Terms
Answer: D
Explanation:
Edit Company Procurement Options centralizes company-specific configuration settings that streamline procurement transactions for that company, including default values that automatically populate on new requisitions and purchase orders to reduce manual data entry. The Official Workday Pro Procure-to-Pay Guide identifies Default Ship-To Contact and Shipping Terms as fields available within Edit Company Procurement Options, allowing the company to establish standard shipping defaults that apply across procurement transactions unless overridden. Option B is incorrect because enabling multi-company functionality on purchase orders is a broader, cross-company configuration concern and is not a field found within this company-specific procurement options task. Option C is incorrect because Enable Company Accounting Details relates to the separate Edit Company Accounting Details task, which governs ledger and accounting configuration, not procurement defaults. Option D is incorrect because Mass Update Ledger Period Status is an accounting period management task entirely unrelated to procurement configuration and would not appear within Edit Company Procurement Options.
NEW QUESTION # 25
The APR spend rule for general ledger 7200 Marketing has these attributes:
* Dimension: Spend Category
* Values: Meetings, marketing, and travel
* Dimension: Cost Center
* Values: 37000 Learning and 24000 Outsourcing
What supplier invoice will post to 7200 Marketing?
- A. Supplier invoice with cost center 24000 Outsourcing
- B. Supplier invoice with worktags of Travel and US - Central Region
- C. Supplier invoice with worktags of Travel and 24000 Outsourcing
- D. Supplier invoice with worktags of Office Supplies and 37000 Learning
Answer: C
Explanation:
Account Posting Rules, such as the APR spend rule described, define the conditions under which a transaction posts to a specific general ledger account by specifying allowed values across multiple worktag dimensions, in this case Spend Category and Cost Center. For a supplier invoice to post to 7200 Marketing, it must satisfy all specified dimensions: its spend category worktag must fall within Meetings, Marketing, or Travel, and its cost center worktag must be either 37000 Learning or 24000 Outsourcing. The Official Workday Pro Procure- to-Pay Guide confirms that all listed dimension conditions must be satisfied for the rule to apply. Option C correctly pairs Travel, an allowed spend category, with 24000 Outsourcing, an allowed cost center, satisfying both conditions. Option A is incorrect because no spend category is identified, leaving the spend category condition unverified. Option B is incorrect because Office Supplies is not within the allowed spend category values. Option D is incorrect because US-Central Region is not one of the allowed cost center values, failing the cost center condition.
NEW QUESTION # 26
What configuration can you perform using the Maintain Worktag Usage task?
- A. Add conditional requirements for transactions.
- B. Add additional worktags for transactions.
- C. Add required worktags for non-transactional objects.
- D. Add primary worktags for non-transactional objects.
Answer: B
Explanation:
Maintain Worktag Usage is the central configuration task that defines, for each worktag type, how that worktag behaves on different transactional business objects, such as requisitions, purchase orders, and supplier invoices. The Official Workday Pro Procure-to-Pay Guide explains that through this task, administrators can add additional worktags, beyond the standard delivered set, making them available for entry on specific transaction types by setting their usage to Optional, Required, or Primary for those transactions. Option A is incorrect because conditional, rule-based requirements that depend on transaction data are configured through Maintain Custom Validations, not Maintain Worktag Usage. Option B is incorrect because Maintain Worktag Usage applies to transactional business objects, such as purchase orders and supplier invoices, not non-transactional objects like suppliers or purchase items. Option C is incorrect for the same reason, non-transactional objects fall outside the scope of this task, and additionally Primary designations are most relevant to transactional documents where routing and reporting are based on the primary worktag value.
NEW QUESTION # 27
When should you close purchase order (PO) lines in Workday?
- A. After the supplier invoice has been paid in full
- B. At the end of the fiscal year
- C. After the purchase order is approved
- D. When all goods on the line are received and invoiced
Answer: D
Explanation:
Purchase order lines represent the agreed scope of goods or services to be delivered and billed, and closing a line signals that no further receiving or invoicing activity is expected, which can also affect budget checks and encumbrance balances. The Official Workday Pro Procure-to-Pay Guide indicates that the appropriate time to close a PO line is once all goods or services on that line have been fully received and fully invoiced, confirming that the line's lifecycle is complete and no remaining activity is anticipated. Option A is incorrect because focusing on whether the supplier invoice has been paid ties the closure decision to the payment process rather than to the completeness of receiving and invoicing, which are the relevant triggers. Option C is incorrect because closing a line immediately after approval would prevent any receiving or invoicing from ever occurring against that line, which contradicts its purpose. Option D is incorrect because tying line closure strictly to fiscal year-end is arbitrary and could result in closing incomplete lines prematurely or leaving completed lines open unnecessarily.
NEW QUESTION # 28
You have reached agreement with a supplier of medical supplies on pricing for often used items. A supplier catalog is created for these items and this catalog is linked to a new supplier contract.
What can be done to ease regular pricing updates for items in this catalog?
- A. Maintain catalog pricing outside of the contract then route updates to the contract in the business process.
- B. Add additional Review or Approval steps in the Catalog Load business process.
- C. Set up a Workday account for the supplier (supplier portal) and allow the supplier to maintain catalog pricing.
- D. Leverage Workday-delivered automated integration with the supplier's system to update the purchase item prices.
Answer: C
Explanation:
When pricing for catalog items linked to a supplier contract changes regularly, manually updating those prices within Workday can create administrative burden and lag between actual market changes and system pricing.
The Official Workday Pro Procure-to-Pay Guide describes the supplier portal as a tool that, once a Workday account is established for a supplier contact, allows the supplier itself to directly maintain and update catalog pricing for items linked to their contract, placing the responsibility for timely updates with the party that has the most current pricing information. Option A is incorrect because Workday does not provide a delivered, automated integration that synchronizes purchase item prices directly with arbitrary supplier systems as a standard configuration. Option B is incorrect because maintaining pricing outside the contract and routing updates through a business process adds manual steps and delay rather than easing the update process. Option D is incorrect because adding more review or approval steps to the Catalog Load business process increases administrative overhead and would make regular pricing updates slower, not easier.
NEW QUESTION # 29
What type of procurement do you use to track spend for physical items?
- A. Goods
- B. Project-based Services
- C. Matching
- D. Service
Answer: A
Explanation:
Workday categorizes procurement at a high level into Goods and Services to support different transactional behaviors, particularly around receiving, since physical items typically require quantity-based confirmation of delivery while services do not. The Official Workday Pro Procure-to-Pay Guide identifies Goods as the procurement type used to track spend for physical, tangible items, enabling the standard requisition, purchase order, and receiving workflow appropriate for inventory-type purchases. Option A is incorrect because Project-based Services is used for tracking billable, project-related service work rather than physical items, and follows a different tracking model tied to project worktags. Option C is incorrect because Matching is not a procurement type at all; it refers to the three-way matching process used to reconcile supplier invoices against purchase orders and receipts. Option D is incorrect because the general Service procurement type covers intangible deliverables such as labor or consulting, which typically do not involve the physical receipt of goods in the same manner as items procured under the Goods type.
NEW QUESTION # 30
An administrator wants to enhance the efficiency of catalog searches. The goal is to eliminate purchase items if there are catalog or supplier items associated to the procurement item.
What subtab in company procurement options would they use?
- A. Purchase Order
- B. Sourcing
- C. Requisition
- D. Receipt
Answer: C
Explanation:
Edit Company Procurement Options is organized into multiple subtabs, each governing settings relevant to a specific stage of the procurement process, such as Requisition, Purchase Order, Receipt, and Sourcing, allowing administrators to configure behaviors precisely where they apply. The Official Workday Pro Procure- to-Pay Guide indicates that the setting to eliminate generic purchase items from search results when catalog or supplier-specific items already exist for the same procurement item is found on the Requisition subtab, since this setting affects what requesters see when searching for items to add to a requisition. Option A is incorrect because the Purchase Order subtab addresses settings relevant to PO creation and behavior, not requisition- time catalog search results. Option C is incorrect because the Receipt subtab configures receiving-related options and has no bearing on catalog search efficiency during requisitioning. Option D is incorrect because the Sourcing subtab manages settings related to the sourcing process, such as request for quote behaviors, rather than how items appear in requisition search results.
NEW QUESTION # 31
What task do you use to view and modify allowed worktags?
- A. Maintain Custom Validations
- B. Maintain Worktag Usage
- C. Maintain Spend Categories
- D. Maintain Related Worktag Usage
Answer: D
Explanation:
Worktags are the dimensions, such as cost center, fund, project, and custom worktags, used throughout Workday for accounting, reporting, and security. Because some worktag values should only be usable in combination with certain other worktags or organizations, Workday provides a configuration layer to control these allowed combinations. The Official Workday Pro Procure-to-Pay Guide identifies Maintain Related Worktag Usage as the task used to view and modify which worktag values are allowed together on a transaction, effectively defining the permitted, or allowed, worktag relationships across the tenant. Option A, Maintain Worktag Usage, is incorrect because that task controls whether a worktag type is Required, Optional, Primary, or Not Used on a given business object, rather than which specific values are allowed in combination. Option B is incorrect because Maintain Custom Validations creates conditional messages for transactions, not allow-lists of worktag values. Option C is incorrect because Maintain Spend Categories manages the spend category hierarchy and its attributes, and has no role in defining allowed combinations of worktags across the tenant.
NEW QUESTION # 32
As the buyer, you would like to report on a specific purchase item (laptop) under office supplies, as well as computers.
What can you request to be created to enable this?
- A. Spend categories
- B. Catalog items
- C. Purchase item groups
- D. Web items
Answer: C
Explanation:
Every purchase item carries one required spend category, but organizations often need to analyze spend across additional, overlapping groupings that cut across spend categories, such as wanting to see a laptop reported both under its existing Office Supplies spend category and alongside other items classified as Computers. The Official Workday Pro Procure-to-Pay Guide identifies Purchase Item Groups as the mechanism for creating these additional, flexible groupings of items for reporting purposes, allowing the laptop to be included in a Computers group without changing its primary spend category assignment. Option A is incorrect because catalog items describe how items are presented for ordering, such as through punch-out or internal catalogs, and are not a reporting classification mechanism. Option B is incorrect because web items relate to externally hosted, punch-out catalog integrations and do not provide a grouping mechanism for cross-category reporting.
Option D is incorrect because spend categories are limited to one per item, the existing Office Supplies assignment, and cannot be used to add the additional Computers reporting dimension.
NEW QUESTION # 33
What can you base the automation of the supplier invoice creation process on?
- A. Supplier contract
- B. Receipt of goods or services
- C. Supplier business process
- D. Purchase order
Answer: B
Explanation:
Evaluated Receipt Settlement, or ERS, is a Workday feature that allows supplier invoices to be generated automatically rather than requiring the supplier to submit an invoice for manual entry. The Official Workday Pro Procure-to-Pay Guide explains that this automated supplier invoice creation process is triggered by the recording of a receipt of goods or services against a purchase order line that has been configured for automatic invoicing, with the invoice amount derived from the PO price and received quantity. Option A is incorrect because, while a purchase order is a prerequisite for the PO line to exist, the act of placing or approving a PO does not itself trigger automatic invoice creation; receipt confirmation is the actual trigger. Option C is incorrect because there is no configurable trigger called supplier business process that drives automated invoicing. Option D is incorrect because a supplier contract establishes pricing and terms that may feed into the PO, but the contract's existence does not initiate automatic invoice generation; receipt activity does.
NEW QUESTION # 34
You are creating a new purchase item. You must define a default tax applicability.
Where can you assign default tax applicability?
- A. On the purchase item
- B. In the Edit Company Procurement Options task
- C. On the supplier
- D. In the Edit Tenant Setup - Financials task
Answer: A
Explanation:
Tax applicability determines whether tax is calculated on a transaction line and is one of several attributes configured during procurement setup to streamline requisition, purchase order, and supplier invoice entry. The Official Workday Pro Procure-to-Pay Guide identifies the purchase item record as the location where a default Tax Applicability value is assigned, so that whenever the item is added to a transaction, the correct default tax treatment automatically populates, reducing manual entry and errors. Option B is incorrect because suppliers do not carry a tax applicability default for items; tax treatment depends on what is being purchased, not who it is purchased from. Option C is incorrect because Edit Company Procurement Options governs company-wide procurement behaviors such as defaults for shipping, sourcing, and requisition settings, not item-specific tax defaults. Option D is incorrect because Edit Tenant Setup - Financials configures tenant- level financial settings such as currencies, fiscal calendars, and general ledger options, and does not provide a mechanism for setting tax applicability on individual purchase items.
NEW QUESTION # 35
You are a supplier administrator at a company using Workday Procurement. A supplier contact is requesting access to the supplier portal.
What must you do before the supplier contact can log in?
- A. Create an initial requisition for the supplier, then create a Workday account for the supplier contact.
- B. Add a supplier contact, then create a Workday account for the supplier contact.
- C. Create a Workday account for a supplier contact, then add the supplier contact.
- D. Add a supplier address, then create a Workday account for the supplier contact.
Answer: B
Explanation:
Supplier portal access in Workday is granted through Workday user accounts that are associated with individual supplier contact records, meaning a contact representing a real person at the supplier must exist on the supplier record before a Workday account can be linked to that person for login purposes. The Official Workday Pro Procure-to-Pay Guide describes the correct sequence as first adding the supplier contact to the supplier record, and then creating a Workday account for that supplier contact, establishing the credential that allows the individual to log into the supplier portal. Option A is incorrect because creating an initial requisition has no bearing on, and is not a prerequisite for, granting supplier portal access. Option B is incorrect because adding a supplier address provides location information but does not establish a person, the supplier contact, who can be associated with a login account. Option C is incorrect because the sequence is reversed; a Workday account must be linked to an existing supplier contact, so the contact record must be created first, not after the account.
NEW QUESTION # 36
You are creating a requisition.
What link do you click to access a supplier website?
- A. Connect to Supplier Website
- B. Go to Websites
- C. Connect to Suppliers
- D. Access Supplier Website
Answer: C
Explanation:
While creating a requisition, requesters often need to browse external supplier catalogs or websites to identify items to purchase, and Workday provides a delivered link within the requisition creation experience to facilitate this navigation directly from the requisition. The Official Workday Pro Procure-to-Pay Guide identifies Connect to Suppliers as the delivered link that requesters click from within the Create Requisition task to access supplier websites, such as punch-out catalogs, for browsing and selecting items. Option B is incorrect because Access Supplier Website is not the actual delivered link label presented within the requisition creation screen. Option C is incorrect because Connect to Supplier Website, while similar in wording, does not match the precise delivered terminology used by Workday for this link. Option D is incorrect because Go to Websites is a generic, plausible-sounding label that does not correspond to any actual link available within the Create Requisition task, making it a distractor rather than a correct delivered feature.
NEW QUESTION # 37
......
Workday-Procure-to-Pay Practice Test Pdf Exam Material: https://prep4sure.vcedumps.com/Workday-Procure-to-Pay-examcollection.html
